DynaChem Solvent Protector

Description

DynaChem Solvent Protector is a solvent-based carpet protector built for carpet cleaning businesses that want a dependable, high-value add-on service after cleaning. It uses a fluoropolymer resin system to add excellent water repellency plus oil-stain and dry-soil resistance on carpet, upholstery, and drapery fibers – so customers see a clear benefit: spills bead up more easily, oily soils are less likely to set in, and routine maintenance becomes simpler.

Unlike concentrate protectors, Solvent Protector is ready-to-use with no mixing or diluting required. That’s a practical advantage for crews: fewer measuring mistakes, faster setup on the truck, and more consistent results across techs. It’s also formulated to avoid noticeable changes to the “hand” (feel) of fabrics and to maintain breathability – important for upholstery and drapery work where heavy coatings can feel stiff.

If your business sells protectors as an upsell, this product supports a simple pitch customers understand: “We can apply a professional protector today to help repel future spills and reduce re-soiling.” The SDS/product sheet provides straightforward coverage guidance so you can price jobs confidently and apply the right amount for the fiber and pile density.

For best results, apply evenly using proper spray technique and the recommended spray tips and pressure. Always pre-test for colorfastness and compatibility especially on upholstery and “dry clean only” fabrics—and follow the SDS for PPE and ventilation. Used correctly, Solvent Protector is an easy way to increase average ticket size without adding significant labor time.

Product Use Cases

• Post-cleaning carpet protection service (residential + commercial)
• Upholstery protector application after upholstery cleaning
• Drapery and fabric protection work where a solvent protector is preferred
• “Protector upsell” service to increase average ticket on carpet & upholstery jobs

Product Directions

IMPORTANT: Always follow the label and SDS.

1) Mix container before use.

2) Pre-test in an inconspicuous area for colorfastness & material compatibility.

3) Apply evenly with professional spray technique.

• Carpet: TeeJet 8001 tip at ~40 psi
• Upholstery: TeeJet 6501 tip at ~40 psi

4) Coverage guidance:

• Carpet up to 24 oz/yd pile density: ~1000 sq ft per gallon
• Carpet over 24 oz/yd pile density: ~800 sq ft per gallon
• Upholstery: typical usage (approx.): chair 11 oz; loveseat 18 oz; sofa 21 oz

5) Allow to dry (approximately ~75 minutes typical dry time). Fan-dry when practical.

Safety Notes & SDS

Read and follow the SDS and label before use. Use nitrile gloves, eye protection, and an organic vapor respirator (NIOSH) if required by conditions. Avoid open flames/ignition sources and use adequate ventilation per SDS.