NEW I5 Infrared Camera 2.8" LCD Screen for Easy Viewing Built-In SD Card for Storing 1000's of Images High Senstivity - 0.2 ° F QuickReport™ PC software Li-Ion Battery for 4 Hours of Usage The Affordable Solution....         #EXI5 - was $2995         REDUCED to $1995 Link to More Info (PDF)
pH Meter w/Carpet Probe - #EX100 - $92.95 Flat Surface Electrode for easy fiber pH; Temperature Measurment; 3 Auto-Calibration Points; Auto Power-Off; Analog Bar Graph for Trends Required for Accurate Spotting & Wool Care Standards Link to Info & Testing Video         Link to pH Scale & Paper
Hygrometer..Now Reads GPP Highest 2% Accuracy from Trusted Manufacturer (who does repairs) Response in 20 Seconds Dual backlit display: Humidity/Temperature Reads 0 to 1120 GPP Humidity/Dew Point; Humidity/Wet Bulb Data Hold and Min/Max functions #EX490 - Only $339.95 Link to More Info (PDF)
Pinless Moisture Meter.. Now Reads Moisture Level Behind the Surface Highest Accuracy from Trusted Manufacturer Response in Seconds Dual backlit display: Humidity/Temperature Humidity in % (sheetrock & wood) #EX280 - Only $149.95
DataLogger Moisture Meter.. Now Reads RH and Temp @ User-Selected Intervals Highest Accuracy from Trusted Manufacturer USB port connects to any Laptop Provides Documentation for Drying Performance # Selectable data sampling rate: 1 second to 24 hours # User-programmable alarm thresholds for RH and Temperature # LCD displays current readings, Min/Max, and alarm status # Complete with 3.6V Lithium battery, mounting bracket with combination lock, and Windows® 2000, XP, and Vista compatible analysis software (w/USB cable) . . . . #EX280 - Only $149.95
Hygrometer Mode measures relative humidity, ambient temperature, dew point and GPP. Pin Measure Mode determines moisture content of wood and sheetrock. Hammer Probe option available. Pinless Measure Mode uses radio frequency to detect moisture non-invasively    $999
The Protimeter Surveymaster SM moisture meter combines the conventional two-pin inspection method, with a non-invasive radio frequency technique. This enables the user to assess the moisture condition not only on the surface, but also at depth quickly and non-destructively.

The Search Mode uses the same colour coded LED scale as the Measure mode, identifying degrees of dampness below the surface. There is also a user adjustable Audible Alarm that sounds to indicating the varying levels in moisture. In this mode the instrument employs radio frequency emissions (RFE) to measure moisture through most wall and floor coverings, including ceramic tiles.

The two-pin Measure Mode identifies by means of green, yellow and red LEDs whether a surface is in a safe i.e. air-dry, borderline or damp condition. The dampness measured is quantified on an LCD display to one decimal place in terms of % wood-moisture-equivalent (%WME).

Whilst in the measure mode the meter can be used with: A two-pin head-and-lead for awkward corners and under work surfaces. A set of deep wall probes that are insulated but for their tips providing quantitative WME readings at depth, regardless of surface dampness and surface contamination by salts. An optional Hammer Electrode ($149) for quick and easy measurement at depth of the moisture content of timber. The instrument is supplied with pouch, moisture probe, deep wall probes, ‘calcheck’ and wood calibration table.

Specs: Power 2 x AA; Pin Mode Range 8-100 WME/Relative; Search Mode Green, Yellow, Red, Relative
Auto Shut Off; Calibration Check; Pouch; Deep Wall Probes; Pin extension lead. . $579.40

---

COBB CARPET SUPPLY
1-800-634-2622

We will match any verified price quotes!
If you have any questions on Carpet Cleaning,
don't hesitate to give us a call.

Cobb Carpet Home Page . . . Revised 4/15/10

   Send Email   Best Viewed w/screen set @ 1024 pixels wide
Webmaster: Larry Cobb