Dura-Glo Stone Polish Powder
New Technology - High Durability Polishing Powder with Time-Release Acid
For Travertine, Marble, Limestone, & Calcium-Content Stone
Polish with Weighted Floor Machine
Earn Dollars/Sq.Ft. for Polishing Stone
"92" Gloss Reading in Minutes from #400 Hone - 8 LB
Instructions - Prepare the surface to be polished by honing it to the highest clarity possible.
Protect surfaces that could be damaged by splatters with proper masking tape & film.
Select an area of approximately 10–12 sq.ft. and sprinkle an ounce (1/2 scoop) of Dura-Glo on an area the size of the pad. Using a spray bottle wet the powder completely. Position a Gorilla (hog-hair) pad on top of the wet powder and a floor machine on top. Swiftly swing the machine over the wet powder to evenly spread the slurry, then polish slowly with an orbital motion moving uniformly over the area, until the slurry dries and the stone surface becomes shiny. The first area will probably need to be gone over a couple of times for proper pad build-up. Each pad side should cover ~100 sq. ft. After that, flip the pad over and go another 100 sq. ft. or so. Rinse the Gorilla pads and reuse a couple of time if desired.
Travertine "Before Photo"
Travertine "After Photo"